MPPT Solar Pump Inverter Price

Best Protections with 3 years warranty

Strict Test Before Delivery

  • PV reverse polarity protection
  • Dry run protection
  • Over load protection
  • Overheating protection
  • Current limiting protection
  • Power limiting protection
  • Less phase of electric motor
  • Short-circuit protection


Electronic Components from Top supplier to ensure high quality:

  • DSP come from Texas Instruments
  • Temp.Chip come from Microchip
  • MOS come from IR
  • IGBT come from Fairchild
  • Opt coupler come from Sharp

The MPPT Solar Pump Inverter price is very resonable and designs at standard platform which provide power from solar PV panels or standby AC generator to control water pump driving by standard 3 phase asynchronous motor.

The MPPT Solar Pump Inverter price is very acceptable by our customers.  Solar Pump Inverter can monitor the performance of system continuously and is integrated with multifunctional system protection. When faults happen, the controller display fault type on the LED at front cover, and can reset automatically from ordinary faults.

The controller optimizes the pumping functions by following measures when the input power from solar panels not good enough.

Allow lower input voltage through internal diagnose.

The controller can maximize the usage of power from solar panel to drive water pump and provides a easy operational interface to strengthen configuration.

① One LED display provides detailed system status.

② One small keyboard provides flexible User selection.


Solar PV input parameterRecommend PV power Capacity7.2KW(36pcs 200Wp)/5.7KW(22pcs 260Wp)/ 3.6KW(18pcs200Wp)
MPPT Voltage500 VDC -700 VDC
Max. Voltage800VDC
MPPT efficiency99%
Output powerRated (V)3 phase 380VAC
Output (Hz)0.00~50.00HZ;
Overload capacity150% rated current for 1 minute,200%rated current for 2 second
Water pumpRated power7.5KW


Input and output phase less protection, over current protection, over voltage protection, low voltage protection, over heating protection, off load protection, weak light protection, dry protection, auto start protection, overflow protection of water tank
othersInstallation typeWall mounted, ground type
Protection classIP20
Cooling methodForced air cooling
environmentOperation placeIndoor, no direct sunlight, no dust, no corrosive gas, no flammable

gas, no oil mist, no water vapor and drop or salt, etc.

elevationBelow 1000m,the controller runs at rated frequency; above 1000

, run at reduced rate, every 100m high, reduce 1%, max.

Height should less 2000m.

Ambient temperature-20℃~+40℃(ambient temperature at 40℃~50℃,need decrease the capacity to work)
moisture5%~95%RH,no condensation
Storage temperature-40℃~+70℃


Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.